Thermoelectric properties of carbon nanotube reinforced cement-based composites fabricated by compression shear

Carbon nanotubes (CNTs) with weight percent of 5.0%, 10.0% and 15.0% were added into the cement matrix to fabricate CNT reinforced cement-based composites (CNTs/CC) by mixing and dry compression shear methods. Seebeck coefficient, electrical conductivity and thermal conductivity of the as-received CNTs/CC were measured and analyzed in detail. The CNTs/CC exhibits the thermoelectric behavior of p-type semiconductor. CNTs were dispersed uniformly in cement matrix by compression shear stress, which promoted a relatively high electrical conductivity (0.818 S/cm) and Seebeck coefficient (57.98 μV/°C) of CNTs/CC. Combining with their lower thermal conductivity ranged from 0.734 to 0.947 W m^?1 K^?1, the CNTs/CC shows the highest thermoelectric figure of merit (ZT) has reached 9.33 × 10^?5, Which is benefit to the applications in large-scale energy harvesting in the buildings and pavements with low cost in the future cities.     

临涣选煤厂粗煤泥回收工艺优化的实践应用

临涣选煤厂针对洗选过程中存在的精煤泥旋流器组溢流跑粗、精煤泥弧形筛筛下水跑粗、精煤泥弧形筛脱水效果较差等问题，重点开展精煤泥分级旋流器组入料分配不均匀、筛分错配物影响、弧形筛脱水效果的现场攻关和研究。现场大量试验表明:通过停止精煤泥旋流器组，增加精煤泥弧形筛数量、减小筛缝尺寸，改变精煤泥弧形筛击打，改用高频脱水筛等方式，从源头上解决了精煤泥分级旋流器组跑粗，明显改善了精煤泥弧形筛筛下水跑粗的问题，提高了精煤泥弧形筛分选效果。在降低介泥灰分、减少浮选过程中粗颗粒的含量、缓解浮选回收压力、降低降低浮选油耗、提高浮选精煤灰分、保证精煤产率、节约生产成本方面有实践意义。     

Dual effect synergistically triggered Ce:(Y,Tb)3(Al,Mn)5O12 transparent ceramics enabling a high color-rendering index and excellent thermal stability for white LEDs

Ce:Y₃Al₅O₁₂ transparent ceramics (TCs) with appropriate emission light proportion and high thermal stability are significant to construct white light emitting diode devices with excellent chromaticity parameters. In this work, strategies of controlling crystal-field splitting around Ce³⁺ ion and doping orange-red emitting ion, were adopted to fabricate Ce:(Y,Tb)₃(Al,Mn)₅O₁₂ TCs via vacuum sintering technique. Notably, 85.4 % of the room-temperature luminescence intensity of the TC was retained at 150 °C, and the color rendering index was as high as 79.8. Furthermore, a 12 nm red shift and a 16.2 % increase of full width at half maximum were achieved owing to the synergistic effects of Tb³⁺ and Mn²⁺ ions. By combining TCs with a 460 nm blue chip, a warm white light with a low correlated color temperature of 4155 K was acquired. Meanwhile, the action mechanism of Tb³⁺ ion and the energy transfer between Ce³⁺ and Mn²⁺ ions were verified in prepared TCs.     

Morphology-dependent spin Seebeck effect in yttrium iron garnet thin films prepared by metal-organic decomposition

In this study, we examined the dependence of surface morphology and spin Seebeck effect (SSE) voltages on the poly[vinylpyrrolidone] (PVP) concentration in polycrystalline Y₃Fe₅O₁₂ (YIG) ultrathin films on a silicon substrate synthesized by metal-organic decomposition followed by a crystallization process. During fabrication, PVP concentrations of 0.5–2 g were used while all other conditions remained fixed. Atomic force microscopy and grazing incidence X-ray diffraction (XRD) measurements revealed a strong dependence of crystallinity and sample morphology on PVP concentration. The 1-g PVP sample had the smoothest surface, with a root mean square roughness of 0.2 nm, as well as superior bulk uniformity with respect to the shape and intensity of XRD reflection peaks. This was confirmed by scanning electron microscopy measurements of a cross-section of the sample that revealed a uniform film without pores. SSE measurements were performed to obtain the output SSE voltages (V_SSE) of all samples, to which a platinum layer was added as a spin-detection layer. Repeatedly, the 1-g PVP sample had the best performance, demonstrating the importance of film crystallinity and morphology in the spin-to-charge conversion efficiency of YIG films.     

木质纤维与水泥共同改良软土的力学性能与微观机制分析

通过压实试验、无侧限抗压强度试验和劈裂试验,分析不同木质纤维含量、水泥含量和固化时间对软土力学性能的影响规律,探讨木质纤维、水泥改良软土的微观机制。结果表明,木质纤维的加入对水泥改良软土的击实特性有显著的影响;木质纤维与水泥可有效改善土体的抗压和劈裂抗拉强度,随着木质纤维含量的增加,改良土的抗压和劈裂抗拉强度呈现出明显的“驼峰”现象,并在木质纤维含量为0.25%时最大;木质纤维与水化产物、软土颗粒形成互锁效应,增大了改良土的摩擦力,同时木质纤维还承担一定的拉伸强度,使改良土的劈裂强度增加。     

Hydrogen storage properties of Mg98.5Gd1Zn0.5 and Mg98.5Gd0.5Y0.5Zn0.5 alloys containing LPSO phases

In this work, the as-cast Mg-rich Mg_98.5Gd₁Zn_0.5 and Mg_98.5Gd_0.5Y_0.5Zn_0.5 alloys are prepared by the semi-continuous casting method, and their hydrogen storage performance and catalytic mechanisms are investigated by experimental and first-principles calculations approaches. The results show that the LPSO phases decompose and in-situ form the RE(Gd/Y)H_x(x = 2,3) nano-hydrides upon hydrogenation. These nano-hydrides not only serve as the in-situ catalysts to promote the hydrogen ab/desorption of Mg matrix, but also present the pinning effect to inhibit the growth of Mg/MgH₂ grains during hydrogenation and dehydrogenation. Comparatively, the two alloys exhibit the similar hydrogen absorption kinetics, while the hydrogen desorption kinetics of Mg_98.5Gd₁Zn_0.5 is superior to that of Mg_98.5Gd_0.5Y_0.5Zn_0.5. The first-principles calculations reveal that the GdH₂ and YH₂ hydrides exhibit different catalytic effects on weakening the bond strength of H–H within H₂ and Mg–H within MgH₂, which interprets well the differences in the hydrogen ab/desorption kinetics between Mg_98.5Gd₁Zn_0.5 and Mg_98.5Gd_0.5Y_0.5Zn_0.5 alloys.     

A new perspective of co-doping and Nd segregation effect on proton stability and transportation in Y and Nd co-doped BaCeO3

Bulk and surface properties of proton stability and transportation in Y and Nd co-doped BaCeO₃ (BCYN), especially the effect of Nd segregation, were investigated by first-principles calculations. Since the structure of doped BaCeO₃ at the operating temperature of proton-conducting has been unclear for a long time, we have summarized the latest experimental results and calculated the structure of the asymmetric BCYN for the first time. The results show that compared with Y, Nd doping promotes oxygen vacancy formation, however reduces proton stability. Our calculation can also provide a possible explanation for the formation of space charge layer at the grain boundary of doped BaCeO₃ in experiment. Unlike the stable Y in BCYN, Nd is calculated to be easily segregated, which can facilitate both proton hydration and proton transportation near the surface. Moreover, Nd segregation at the grain boundary is predicted to be beneficial for proton transportation between grains.     

Theoretical investigation of solvent effects on the selective hydrogenation of furfural over Pt(111)

It was well known that solvent effect plays a very important role in the catalytic reaction. There are many theoretical studies on the solvent effect in homogeneous catalysis while there are few theoretical studies on the solvent effect in the heterogeneous catalytic reaction and there has been no work to investigate the solvent effect on furfural transformation in heterogeneous catalysis. In the present work, both the density functional calculations and the microkinetic analysis were performed to study the selective hydrogenation of furfural over Pt(111) in the presence of methanol as well as toluene and compared with that in the gas condition. The present results indicated that the methanol can enhance the adsorption strength of furfural and other oxygen-containing reaction species due to its relatively strong polarity properties and this can be a main reason for solvent-induced high activity and selectivity. Another reason is that reaction paths study showed that the presence of methanol solvent makes the dehydrogenation of furfural less thermochemical due to the fact that furfural is more stabilized than that of dehydrogenation species, and methanol also has an inhibition effect on the dehydrogenation of furfural in the kinetic aspect, and further energetic span theory proves highest activity and selectivity for hydrogenation in methanol solvent of vapor, methanol and toluene. Moreover, microkinetic model simulation demonstrated that the activity and selectivity of hydrogenation in methanol is both higher than that in vapor and toluene. The much higher activity in methanol is due to the stabilized adsorbed reactants in the surface, which leads to a higher surface coverage of furfural. It might be proposed based on the present work that a solvent with relatively strong polarity may be favorable for the high selective hydrogenation of furfural.